The Snapper ZTX 105 Zero Turn offers unparalleled access into out of the reach places thanks to its compact 36″/91cm cutting width. Combining commercially inspired features such as its fully welded steel frame, thick-walled front axle and easy access maintenance points the ZTX 105 zero turn tractor introduces cutting performance to a whole new level.

Powered by a Briggs & Stratton 626cc Intek™ 7200 V-Twin OHV engine, fuel efficiency, low vibration and smooth running are characteristics thanks to the V-Twin cylinder design. A full pressure lubrication system and spin-on oil filter enhance maximum engine life.

Manoeuvring the compact ZTX 105 is controlled by the adjustable soft touch levers, whilst a comfortable driving position is enhanced by the mid-back seat with built-in armrests.

Manufactured from 12 gauge fabricated steel, the heavy-duty rear discharge cutting deck enables the operator to cut quickly and leave a smart finish. The foot-operated mower deck lift and uncomplicated single pin design allow 7 heights of cut to be made, ranging from 38mm-114mm. Electric engagement of the double-bladed cutting deck is easily made by the ergonomically placed panel mounted control. Deck wheels provide additional support and help to reduce scalping, whilst the addition of a wash port makes underside deck cleaning simple.

A mulch kit and cargo bed are available as an option.

Specs:

Briggs and Stratton Intek 7200 V Twin Engine

Powerful Engine

36inch/91cm Rear Discharge Cutter Deck

Fabricated for Durability (Mulching Kit Optional)

Hydro-Gear Transmission

Twin Lever Steering- Easy Manoeuvrability

Twin Lever Steering C/W Comfort Grips

Comfortable To Operate

Hose Fitting

Enables You To Keep The Cutter Deck Clean.

Pivoting Front Axle

Smoother Ride, On Uneven Terrain

Foot Controlled Cutter Deck Lift

Leaves Both Hands Free To Steer

Comfortable Seat C/W Adjustable Arm Rests

Comfortable To Operate

Snapper ZTX175 Zero Turn Ride on Mower The new Snapper ZTX175 is a new model for 2022 based on their ever popular Zero turn chassis. What sets this new ZTX175 apart is the rear eject 42" fabricated steel cutting deck with 3 cutting blades. This deck is usually found on commercial zero turn mowers and is built for strength and performance.

The ZTX175 is fitted with a powerful and dependable Briggs and Stratton V-Twin 7220 series engine with 656cc. User friendly features on this zero turn mower include a very comfortable, ergonomically designed seat complete with arm rests, effortless motion control, thanks to the easy to use motion levers foot operated height adjustment. The ZTX175 rear eject cutting deck comes fitted with Snapper's 1/2 baffle kit including eliminator blades - for a clean cut.

Engine Model Briggs & Stratton Professional Series™ 7220 Exi V-Twin OHV
Cylinders 2
Starting System Electric Start
Fuel Capacity 11 litres
TRANSMISSION
Drive Type Hydro-Gear® EZT®
Forward Speed 0 – 11,0 km/h
Reverse Speed 0 – 4,0 km/h
CHASSIS
Frame Welded Steel
Tyres front 11” x 4”
Tyres rear 20” x 8”
Turning radius 0 cm
Deck/Attachment lift Mechanical – foot operated
MOWER
Cutting Width 107 cm
Mower Deck Frame Hung
Deck Construction Fabricated Steel
Height-of-Cut Range 38 – 110 mm in 13 positions
Blades 2
DIMENSIONS
Length 187 cm
Width 150 cm Rear Discharge flap down
Height 101 cm
Wheel base 112 cm
Weight 237 kg
OTHER FEATURES
Seat Adjustable with armrests

The Snapper ZTX 275 stands out as being uniquely different in the zero-turn sector. Built to the same commercially inspired standards as its Snapper siblings a fully welded steel frame, thick-walled front axle and easy access points make this 48"/122cm machine built to last.

With a rear discharge cutting deck, equal and closer cuts are able to be made whichever way around an obstacle is approached. The unwanted spreading of grass onto footpaths and flower beds is further prevented. Snappers CentreCut™ deck is manufactured from 12 gauge fabricated steel and is both tough and long-lasting. Due to the half-height baffle kit and eliminator blades, a superior finish is given.

Practicality is further enhanced thanks to the rear-mounted cargo bed providing convenience and versatility whilst working in the garden. Engine access is uncompromised, thanks to its flip-up design.

Power is provided by a Briggs & Stratton Professional Series™ 8270 V-Twin OHV engine. A premium unit, fuel efficiency, low vibration and smooth running are characteristics of this engine thanks to its V-Twin cylinder design. A full lubrication system and spin-on oil filter enhance maximum engine life.

Superb manoeuvrability is controlled by the adjustable soft touch levers, whilst a comfortable driving environment is enhanced by the premium mid-back seat with built-in armrests.

The heavy-duty rear-discharge cutting deck enables the operator to cut quickly and efficiently. The foot-operated mower deck lift and uncomplicated single pin design allow 13 heights of cut to be made, ranging from 38mm-110mm. Electric engagement of the triple-bladed cutting deck is easily made by the ergonomically placed, panel-mounted control. Deck wheels provide additional support and help reduced scalping, whilst the addition of a wash port makes underside cleaning simple.

A full-height mulching kit is available as an option.

Specs:

122cm cutting width

38-110mm height of cut range

Briggs & Stratton Intek™ Series 8270 V-twin engine

Two dependants Hydro-Gear® EZT® transmissions

Twin lever controls for smooth, fast manoeuvring

12-gauge fabricated steel

Rear eject deck with 1/2 baffle eliminator blades

13 cutting height adjustments

Optional mulching kit & grass collector

Cargo bed included

Adjustable seat with armrests

287kg of weight